Tutorial Shape
-The only problem i had with the tutorial was that i couldn’t get rid of that white box on the top corner of the shape.
Laptop Charger Holder
-Here all I had to do was follow your in class example and make the height of the clamp equal to the height of my desk.
2 Shapes That Fit Together
-Here I made 2 hollowed out squares that are 10 x 10 x 1.
-Then I made a gap in the first one that is 0.5mm wide so it can fit the other shape with the gap I placed in that.
-Finally, I made the other shape have 2 gaps that are 0.25 x 1mm which left a 1 x 0.5mm bridge in this shape that can properly fit through the gap in the first shape.
-I know you wanted us to make 2 shapes that would fit together without falling apart so i figured due to the large hole in both shapes, once you actually put them together they would be relatively difficult to just fall apart through the small gap fitting perfectly with the bridge of the other shape.
Tyler Rose Emerging technology 